Multi Daylight Rubber Moulding Press

Product Information

INDEXPELL MAKE Rubber Compression Moulding Hydraulic Press are reliable , High Productivity and easy in Loading and unloading material. INDEXPELL MAKE Presses can be supplied in 30 to 2000 Ton capacity,platen size 300mmX300mm to 1300mmX3200, in single or multiple daylights in Electrical/ steam/ Thermic fluid heated versions, single or battery of 2-3-4 presses, with Hand lever operation and Automatic Type.

These Presses comes in different Sizes , Tonnage and Daylight as per customer requirement. Presses are available in FRAME Type as well as PILLAR Type.

Types of Hydraulic Presses:-

Rubber Moulding Curing Press, Automobile Tube Curing Hydraulic Press, Rubber Flap Curing Press in Single and Two Daylight.

The Presses are provided with Hydraulic pumping Station with Closing and Opening speed of the Press as per customer requirement. Electrical Panel with Temperature indicator and PLC , Curing timer , Bumping Cycle can also be provide as per customer requirement.

Automatic mould handling system which are convenient for two plates, three plates or four plates mould. Which can be opened inside or outside the press. With auto demoulding system as optional.

Salient Features Of Rubber Compression Moulding Hydraulic Press :-

  • Frame / Pillar :- Cut From Mild Steel Without Welding Joints (Ut Tested) Or Pillar Duly Machined.
  • Cylinder :- Steel Casting Cylinder With Gun Metal Lining (Ut Tested)
  • Ram :- Mild Steel With Ground Hard Chrome Plated Surface
  • Platten :- Made Out Of Solid Plate With Machined Surface, Drilled Holes For Cartage Heaters.
  • Hydraulic Powerpack :- Hydraulic Powerpack Consists Of Low Pressure Pump (Vane Pump), High Pressure Pump (Plunger Pump) Both Pumps To Run On Single Motor, Pressure Releif Valve, Pressure Control Module, Oil Filter With Oil Filler, Pressure Gauge, Pressure Switch, Oil Tank (Without Oil)
  • Control Panel: – Control Panel for Automatic operation or for Bumping Cycle And Curing Timer Is Provided As Per Customer Requirement.

Standard And Frequently Sold Rubber Compression Moulding Hydraulic Press Sizes Are As Under :

Model No. Platen Capacity Ram Stroke Working No.of Power Pack
Size Tones Dia of pressure day Motor
mm x mm mm Ram kg/cm2 light H.P./R.P.M.
IEW/HY-1 300 x 300 40 170 175 160 2 2/1440
IEW/HY-2 400 x 400 60 225 300 140 3 3/1440
IEW/HY-3 450 x 450 60 225 300 140 3 3/1440
IEW/HY-4 600 x 600 100 300 300 140 4 3/1440
IEW/HY-5 675 x 675 100 300 300 140 4 3/1440
IEW/HY-6 750 x 750 150 300 300 190 4 5/1440
IEW/HY-7 800 x 800 300 400 500 210 4 5/1440
IEW/HY-8 900 x 900 350 450 500 200 4 7.5/1440
IEW/HY-9 1200 x 1200 350 450 500 200 4 10/1440
IEW/HY-10 1200 x 1200 475 560 500 200 4 15/1440